358 Mesh: The Ultimate Solution for Security Fencing

358 mesh is tough to penetrate. The small mesh aperture is effectively finger proof and extremely difficult to attack using conventional hand tools.'358 mesh ' comes from its measurements 3" x 0.5" x 8 gauge, which equates to approx.The "358" in 358 Anti Climb Security Fence refers to its measurements: 3 inches by 0.5 inches by 8 gauge, which translates to approximately 76.2mm by 12.7mm by 4mm (mesh hole by wire diameter). This fence is perfect for applications demanding high security and restriction. Its tight mesh size provides an excellent barrier, highly resistant to climbing and cutting, and maintains its tension without spreading. Installers connect the flat iron and columns using screws, allowing the fence installation to adapt to almost any terrain. You can either embed it using a flange or secure it onto a concrete floor. For enhanced protection, you can top the fence with razor barbed wire or ordinary barbed wire, supported by Y-shaped columns.

• Consistency in Welding: The small openings of 358 mesh require precise and consistent welding to maintain the integrity of each joint. Inconsistent welding can lead to weak spots that compromise the security of the fence.
• Heat Control: Managing the heat during welding is crucial because too much heat can warp the mesh or weaken the wires. It's important to use the right welding settings to ensure strong bonds without damaging the mesh.
• Wire Alignment: Before welding, it's vital to align the wires properly. Misalignment can cause uneven mesh and potential security flaws. Ensuring that all wires are correctly positioned will result in a more secure and visually appealing fence.
• Cleaning the Wire: The wires should be clean and free of any coating or oxidation before welding. Contaminants can impair the welding process and lead to weak joints. Using clean material helps in achieving stronger and more reliable welds.
• Checking Equipment: Regularly checking and maintaining welding equipment is essential. Faulty equipment can cause poor welds, which might not be immediately evident but can significantly affect the fence’s durability and strength.
• Protection Measures: Welders should use appropriate protective gear to shield against sparks, heat, and harmful fumes generated during the welding process.
• Post-Weld Inspection: After welding, inspecting the mesh for any missed spots, weak welds, or inconsistencies is important. This ensures that the final product meets the high security standards required for 358 mesh.
• Rust Prevention: After welding, treating the mesh with a rust-preventative coating, such as galvanizing or powder coating, protects the metal against weather elements and prolongs its lifespan.

The "358 mesh" refers to a specific type of security fencing that is highly effective at deterring intrusion. The numbers "358" denote the measurements of the mesh pattern: 3 inches (76.2 mm) x 0.5 inch (12.7 mm) aperture (hole size), with 8-gauge (approximately 4 mm) wire. This fencing is known for its close, tight mesh configuration, which makes it extremely difficult to climb, cut, or penetrate using conventional tools.

358 fences are widely used in high-security environments such as prisons, military sites, and critical infrastructure facilities due to their robust and secure design. They provide excellent visibility, which is important for surveillance purposes, and their durability ensures a long-lasting barrier against trespassers.

ANTI-CLIMB mesh: More small openings, no toe or finger holds.	ANTI-CUT: robust wire and welded joints make cutting very difficult.

1) 358 mesh Use the hot-dipped galvanized (or electro galvanized) wire as material; begin PVC or plastic spraying after welding.

2) Use the low carbon steel wire welded the panel, then electro or hot-dipped galvanized treatment, finally PVC treatment.

3) In Europe, generally choose 358 fence galvanized after welding or PVC after welding.

1. Elegance, Excellent Vision through the fence
2. Durability, Maintenance-free, Extremely strong & rigid structural
3. Resistant/Resistance to cutting by lightweight hand tools
4. Anti-climb design/anti-rust, Easy Installation

</div>