Clear view fencing Pretoria offers a practical balance between perimeter security, visibility, and modern design. Its closely spaced welded wires discourage climbing without creating a solid visual barrier. Property owners can monitor activity through the fence while protecting valuable buildings, equipment, and outdoor areas.
Boss Metal and Plastic Co., Ltd. (BMP) manufactures welded security fencing in Anping County, Hengshui, China. Since 2006, we have supplied fencing products for South African projects. We support Pretoria buyers with panel specifications, coating choices, export packaging, and project-based quotations.
Traditional solid walls obstruct views and can create concealed areas. Clear view mesh allows guards and cameras to observe activity across a boundary. Its narrow apertures provide few practical fingerholds or footholds for climbing.
The high-security configuration uses a mesh pitch of 76.2 × 12.7 mm. Buyers often call this construction 358 fencing. The name describes a 3-inch by half-inch aperture with approximately 8-gauge wire.
For detailed product comparisons, explore our High-Security Clear View Fence and Clearvu Fencing pages.
Fence performance depends on wire diameter, post strength, foundation design, and installation quality. No fence can guarantee complete resistance against determined intrusion. Our Clear View Fencing guide explains additional panel configurations.
A narrow horizontal opening makes climbing harder than wider mesh alternatives. The welded pattern also allows light and airflow across the boundary. Wire diameter influences panel weight, visibility, and cutting resistance.
Our reference specification uses a 76.2 × 12.7 mm mesh pitch and approximately 3.95 mm steel wire. Standard reference panels measure 2,515 mm wide, with several available heights. Buyers can request other wire diameters, panel widths, and fastening systems.
These figures describe reference configurations rather than universal dimensions. Please confirm aperture orientation, wire diameter, and panel tolerances before ordering.
The table below preserves the reference sizes and approximate weights from our specification range. Each panel uses a 2,515 mm width and 76.2 × 12.7 mm mesh pitch. Weights assume approximately 3.95 mm wire and may vary with manufacturing tolerances.
| Panel size (mm) | Approx. weight | Panels per pallet | Galvanised | Galfan |
|---|---|---|---|---|
| 2515 × 1207 | 27.2 kg | 50 | Yes | Yes |
| 2515 × 1270 | 28.6 kg | 50 | Yes | Yes |
| 2515 × 1829 | 41.1 kg | 25 | Yes | Yes |
| 2515 × 2134 | 47.8 kg | 25 | Yes | Yes |
| 2515 × 2438 | 54.6 kg | 25 | Yes | Yes |
| 2515 × 2705 | 60.6 kg | 25 | Yes | Yes |
| 2515 × 2997 | 67.1 kg | 20 | Yes | Yes |
| 2515 × 3302 | 73.9 kg | 20 | Confirm | Yes |
| 2515 × 4204 | 94.0 kg | 15 | Confirm | Yes |
| 2515 × 5207 | 116.4 kg | 10 | Confirm | Yes |
Actual pallet quantities depend on coating thickness, stacking layout, and container loading limits. Tall panels require careful handling and a suitable structural design.
Coating selection affects corrosion resistance, appearance, maintenance, and overall project cost. Pretoria installations face sunlight, seasonal rain, and different exposure conditions. Project sites near chemicals or industrial emissions may require additional protection.
Reference options include 80–100 g/m² zinc-coated wire and 275–300 g/m² Galfan-coated wire. Some projects specify polyester coating near 100 microns. Confirm exact coating mass, preparation, and testing requirements in the purchase specification.
Explore our Powder Coated Clear View Fence page for finish examples and colour options.
Compare coating systems using the project's environment and expected maintenance schedule. Request documented coating thickness, pretreatment details, and relevant test reports. Repair damaged surfaces after installation to reduce corrosion at exposed edges.
Posts, clamps, and foundations determine how reliably a panel performs after installation. We offer square posts, rectangular posts, and other project-specific profiles. Common square post options include 60 × 60 mm and 80 × 80 mm sections.
Panel height, ground conditions, and wind exposure determine the final post specification. Security clamps, flat bars, anti-tamper fasteners, and post caps complete the assembly. Our Clearvu Fence page introduces several post profiles and accessory systems.
A complete perimeter needs reliable pedestrian and vehicle access points. Matching welded mesh helps gates maintain the same sightline as adjoining panels. Gate frames, hinges, locks, and posts require separate structural checks.
Optional additions include angled arms, fence spikes, razor wire, and compatible electric fence brackets. Apply local safety requirements before specifying electric or sharp security toppings. Choose gate hardware according to traffic volume and access-control needs.
Start with a site survey and a clear security objective. Identify entry points, slopes, drainage routes, and areas that need camera coverage. Separate routine boundary protection from higher-risk entrances and equipment yards.
Security requirements may justify a 358 mesh system or a wider-aperture alternative. Compare our Low Security Clear View Fence 1200mm x 3050mm before selecting a project specification.
Open mesh allows cameras to monitor areas beyond the boundary. Position cameras to reduce blind spots around corners and gates. Lighting should support night surveillance without creating excessive glare.
Accurate measurements reduce cutting, rework, and alignment problems. Check total fence length, post spacing, ground levels, and gate openings before production. The installer should follow approved engineering drawings and local requirements.
Other project layouts may suit wider panels. Review the 1800mm x 3050mm Low Security Clear View Fence as an alternative configuration.
This fencing system suits properties requiring visibility and a physical boundary. Buyers can select different heights, coatings, and accessories for each location.
Lower-risk spaces may favour wider-aperture designs. Our 2000mm x 3050mm Low Security Clear View Fence offers another reference size.
Our factory handles mesh welding, surface treatment coordination, inspection, and export packing. Production planning starts with approved drawings and confirmed specifications. We check raw materials, panel dimensions, weld quality, coating appearance, and packing conditions.
To request a quotation, send your required length, fence height, panel width, coating, and delivery destination. Include gate quantities, drawings, and additional security features when available. Small samples and custom production may be available after specification review.
For related configurations, see ClearVu Fence for Sale.
We arrange export packaging for shipment from China to South Africa. Freight routes, customs clearance, and inland delivery depend on the selected trade terms. Buyers should confirm the final Pretoria delivery address and unloading arrangements.
No. Boss Metal and Plastic Co., Ltd. manufactures fencing in Anping County, Hengshui, China. We supply South African customers through international orders.
Yes. We can review drawings for custom heights, widths, wires, posts, and coatings. Production feasibility depends on the design and order quantity.
Yes, suitable brackets can support an independently designed electric fence system. A qualified installer should assess electrical safety, clearances, and applicable local rules.
Security risk, wire size, fence height, post design, coating, and ground conditions all matter. A complete quotation should also include gates, fittings, freight, and delivery terms.
BMP also supplies customers planning perimeter projects outside Pretoria. Explore Clear View Fencing Durban and Clear View Fencing Cape Town for regional product information.
For another Cape Town configuration guide, see Clear View Fence Cape Town. Contact BMP with your drawings and project requirements for a tailored supply proposal.
